The Manta bench is available in two configurations: a mobile version on wheels, to be used with any two-post lift or with a scissor lift (4.5 or 6.0 Tons).
On both models it is possible to mount different series of sill clamps (both universal and specific) and its specific Manta pull post. Naturally both models are predisposed to host on the crossbeams the Universal Jig system and the Electronic measuring instrument Contact Evolution.
SCISSOR LIFT CONFIGURATION
The bench combined with a special scissor lift is mobile and inclinable on both ends. Its dimensions have been optimized to allow the maximum accessibility, both inside and outside the frame during the entire repair process in order to work in an efficient ergonomics approach. Its technical specifications enable the end-user to carry out re-alignment operations when repairing passenger’s cars, light commercial and off-road vehicles while maintaining a comfortable working posture. The frame is manufactured using a high tensile steel which is milled to ensure a precise positioning of the checking points and powder painted. Approach ramps and side runners thanks to their specific design allow the loading on board of the vehicle without dismantling the basic equipment.
WATCH THE VIDEO ON OUR YOUTUBE CHANNEL
TECHNICAL FEATURES
Mobile benches with Manta frame |
|||
Bench Lenght |
4,5 m (15') |
5,2 m (17') |
6,0 m (20') |
Frame weight |
640 Kg |
730 Kg |
860 Kg |
Lifts with Manta frame |
Scissor lift with 4,5 ton load capacity (9,920 lb) |
Scissor lift with 6,0 ton load capacity (13,300 lb)
|
||
Bench Length |
4,5 m (15') |
5,2 m (17') |
5,2 m (17') |
|
Load Capacity |
4,5 ton. (9,920 lb) |
6,0 ton. (13,300 lb) |
||
Min. lifting height |
320 mm (1') |
320 mm (1') |
||
Max. lifting height from working area |
1800 mm (5' 90") |
1800 mm (5' 90") |
||
Weight of lift with frame |
1,30 ton. |
1,40 ton. |
1,40 ton. |
1,50 ton. |
Nominal Power |
2 Kw |
2 Kw |
||
Nominal Voltage |
380 V |
380 V |
||
Nominal Current |
4,3 A |
4,3 A |
||
Nominal Frequency |
50 Hz |
50 Hz |
||
Max pressure when lifting |
280 Bar |
280 Bar |
||
Max pressure when lowering |
130 Bar |
130 Bar |
||
Hydraulic Oil |
Shell Tellus Oil HM 46 or with compatible viscosity |
|||
Weight of electrohydraulic control unit |
60 Kg |
Pull posts |
Manta |
Pulling power |
10 ton. |